Specifications
Cutting band size                      2720×27×0.9 mm
Band tension                             mechanical (manual)
Band speed                              36, 72 m/min
Arm lowering control              stepless – hydraulic cylinder
Vice base height                      765 mm
Minimum material length in vice 100 mm
Power supply                           3-phase, 400 V
Cooling pump motor power  0.025 kW
Weight                                       330 kg
User manual
CE declaration

Angle
0° ø250 310×210 240×240
45° right ø200 200×140 180×180
45° left ø165 185×145 160×160
60° right ø120 120×95 100×100

G5025 Bandsaw

​Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron.

The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides.

The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm.

The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks.